====== Configuring your domain for a Behance ProSite website ======

So you have created a website with Behance and now need to configure your domain name at Gandi so that it displays your website.

After having finished configuring your Gandi domain for your Behance ProSite website, you will need to make some technical changes to your domain at Behance (see Step 3 below). For security purposes, Gandi cannot perform these changes for you.



===== Step 1: Log into your domain name =====
You will need to log in to [[http://www.gandi.net/login|Gandi.net]] with the Gandi handle listed as the domain's owner, administrative, or technical contact ([[en:contacts:troubleshooting:login|trouble logging in?]]).

<note> If you have registered your domain name directly with Behance or another [[:en/contacts/reseller|reseller]], they may have created and manage a Gandi handle on your behalf. If this is the case, you will see a message on our website saying that you do not have [[:en/contacts/noaccess|sufficient rights]], and you will need to contact them to either make the changes on your behalf or release your Gandi handle so you can make them yourself.</note>


===== Step 2: Change your zone file =====

You now need to make a change or two to your DNS zone file so that your domain points at your website.

There are two ways of doing this:
  - Adding an [[:en:dns:zone:a-record|A record]] so the ''www'' subdomain points to ''98.129.62.40'' (or whatever IP Behance/ProSite has assigned you), or 
  - Adding a [[:en:dns:zone:cname-record|CNAME record]] pointing to ''yourportfolioname.prosite.com.'' (where ''yourportfolioname'' is replaced by the name of your own portfolio).



==== Adding records ====
To add the A record or CNAME record, you need to first make an editable copy of your zone file ([[:en:dns:zone:edit|see instructions]]).

The entry or entries you need to add will look something like one of these (check your Behance/ProSite account to be sure):

  www 10800 IN A 98.129.62.40
  www 10800 IN CNAME example.prosite.com.


<note tip>
If you want to link another subdomain instead of ''www'' (i.e. ''portfolio.example.com'') just replace ''www'' above with ''portfolio''.
</note>

<note>
When adding a CNAME record, don't forget the dot (''.'') at the end of ''example.prosite.com.'' or it won't work!
</note>

Don't forget to add an A record for the bare domain, in addition to the ''www'' subdomain as above (unless you've added [[:en/domains/management/domain-as-website/forwarding|web forwarding]] to redirect ''example.com'' to ''%%www.example.com%%''):

  @ 10800 IN A 98.129.62.40

Which entries you add depends on your own site's configuration. 

==== Example of a zone ====
Here is an example of a zone file for a domain that will bring visitors to a ProSite/Behance website:

  www 10800 IN A 98.129.62.40
  @ 10800 IN A 98.129.62.40
  @ 10800 IN MX 50 fb.mail.gandi.net. 
  @ 10800 IN MX 10 spool.mail.gandi.net. 
  imap 10800 IN CNAME access.mail.gandi.net. 
  smtp 10800 IN CNAME relay.mail.gandi.net. 
  webmail 10800 IN CNAME agent.mail.gandi.net. 
  blog 10800 IN CNAME blogs.vip.gandi.net. 
  pop 10800 IN CNAME access.mail.gandi.net. 

<note>After you **submit and activate** your new zone file, please be sure to wait three hours for the zone to be updated with the new information, as the changes are not seen immediately due to DNS propagation delays. When propagation is complete (you will able to tell by your domain name's behavior), proceed to step 3. </note>

===== Step 3: Update your Behance ProSite settings =====

Enter your custom domain on ProSite in Settings -> Change Domain. 

Your domain name should then display your portfolio website.

===== Step 4: Add web forwarding (optional) =====

You may want certain domain names to automatically redirect visitors to the address you configured above. If so, just add a [[:en/domains/management/domain-as-website/forwarding|web forwarding entry]] for each domain or subdomain you want to be redirected.

===== See also =====
  * Behance ProSite FAQ: [[http://prosite.com/home/faq?question=82|How do I set up a custom domain?]]